can you tell me what all are interchangeabl? I have a compleat 1972 454 big block that I pulled out of a 81 k5 blazer and a 1967 327 with camel hump heads that have NO accessories holes that I'm putting in to the blazer but the 327 needs a water pump,water
Simple answer- NONE!!
There are no interchangeable parts between the Big Block and the Small Block Chevrolet engines........
This is a big block Chevy with a tunnel ram and Edelbrook aluminum heads. This motor makes 668hp at 6900rpms. The pulleys and brackets are my long ...
March Performance Revolver serpentine system is created with a combination of style and low price that is sure to find favor among car enthusiasts ...
This summary will hopefully save time and prepare the mechanic for the installation of a serpentine belt assembly on a big block Chevy in a 1964 – 1967 Chevelle. These instructions should be the same for all GM “A” body’s. First, it will be necessary to order a set of conversion brackets from Kwik Performance to allow for the installation of a serpentine belt bracket system. The best brackets to work with will be from a 1994 truck small block or V6 set-up
Here is a list of parts you will need to complete this installation in the GM “A” body. * I preferred to use a performance radiator such as Superior Radiator in Mt. Clemens Michigan. They use an all aluminum two 1” core style that would be difficult to overheat., even with A/C. Prepare to use around 6 gallons of liquid with this puppy. The radiator cost is minimal, compared to a conventional 1966 Chevelle BBC Radiator. A small block radiator will not do the job what so ever
Get Started Remove the positive battery lead for safety. Remove all the belts, water pump and pulleys from the engine. As noted in the Kwik installation instructions, you will have to buy the 1988 up “454” water and crank pulleys from a company like JEGS. They have the right ones and shipping is quick. Remove the old water neck from the intake. Once all the brackets and accessories have been removed, install the new water pump, followed by the Kwik installation brackets. Be sure all bolts are tight. Install the serpentine belt brackets for both the left and right. Tighten to specifications. Install the new “454” pulleys for the water pump and crank. Trial fit the belt to insure proper clearance of the idler and the fan pulley
You can now install the flexible 360В° water outlet neck, but do not tighten until the angle required is located. You can install the heater hoses. Connect the battery lead to the alternator, and the output lead to the original brown alternator wire of the cars’ wiring harness. Be sure you have eliminated the regulator from the car and adapted the old circuit by installing a regulator eliminator plug in the body wire harness ….
...
Pulleys Brackets and Serpentine Systems for High Performance Automotive use, Chevy, Ford, Chrysler, and Pontiac
CFR Performance supplies high quality billet aluminum & chrome steel brackets and bracket sets that are designed to work with most Chevy, Ford and Mopar engine ...
Chevy Low Profile Alternator Bracket, Big Block, 1955-1972 Classic Chevy parts exclusively for 55-56-57 Chevrolets, Tri-Five Chevy accessories, 1955, ...
Chevy Alternator Bracket, High Mount, Big Block, Long Water Pump, 1955-1972 Classic Chevy parts exclusively for 55-56-57 Chevrolets, Tri-Five Chevy ...
(MCC0637) CHROME SMALL BLOCK CHEVY ALTERNATOR BRACKETS 1976 - 1986 FOR 350 400 ... (MCC0647) CHROME BIG BLOCK CHEVY ALTERNATOR BRACKET 396 427 454 LWP ...